Danh mục sản phẩm

NHÀ CUNG CẤP
Danh mục sản phẩm >

Electro-sensors

SG1000A - Slide Gate Monitor

SG1000A - Slide Gate Monitor
Mã sản phẩm: SG1000A
Nhà sản xuất:
Provides independent, accurate feedback of slide gate position to a controller (PLC) or optional remote slide gate display

SG1000B - Linear Position Monitor

SG1000B - Linear Position Monitor
Mã sản phẩm: SG1000B
Nhà sản xuất:
Electro-Sensors' SG1000B is a complete position monitoring system designed to sense the position of both linear and rack-and-pinion driven slide gates

SG1000C - Rotary Position Monitor

SG1000C - Rotary Position Monitor
Mã sản phẩm: SG1000C
Nhà sản xuất:
Electro-Sensors' SG1000C is a complete position monitoring system used to accurately measure the position of a process that has a repetitive single-turn rotary movement

SG1000D - Valve/Damper Position Monitor

SG1000D - Valve/Damper Position Monitor
Mã sản phẩm: SG1000D
Nhà sản xuất:
Electro-Sensors SG1000D Valve Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X enclosure. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure a rotary process such as a valve position having a clockwise or counter-clockwise rotary movement. The SG1000D works on rotary processes having a full-scale sweep as small as 15 degrees (fully-closed to fully-open), up through those having a full-scale sweep as large as 359 degrees

SG1000E - Sub-Turn Shaft Monitor

SG1000E - Sub-Turn Shaft Monitor
Mã sản phẩm: SG1000E
Nhà sản xuất:
Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA 4X housing. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure a rotary process such as a shaft position having a clockwise or counter-clockwise rotary movement. The SG1000E works on rotary processes having a full-scale sweep as small as 5.6 degrees (fully-closed to fully-open), up through those having a full-scale sweep as large as 130 degrees

Shaft Speed Switch LRB1000

Shaft Speed Switch LRB1000
Mã sản phẩm: LRB1000
Nhà sản xuất:

Shaft Speed Switch

Features
  • Failsafe operation
  • Setpoint ranges: 1-100 and 10-1000 rpm 
  • Built-in start delay
  • DIN rail or stand alone mounting
  • Dial-in calibration does not require power
  • ETL approved to UL 508 standard

Speed Alarm AS-Interface

Speed Alarm AS-Interface
Mã sản phẩm:
Nhà sản xuất:
Electro-Sensors ASiSA is an AS-Interface speed sensor with underspeed alarm designed to operate in demanding, hazardous and industrial environments. The ASiSA continuously monitors rotating shaft speed, comparing it to a trip-point setting and alarming when less than the trip-point. The alarm state is accessible over AS-interface communications and visibly indicated by the internal alarm LED. All ASiSA alarm functions are complete field-selectable and settable

SpeedTalker DN

SpeedTalker DN
Mã sản phẩm:
Nhà sản xuất:
Electro-Sensors' SpeedTalker-DN (UI) converts pulse frequencies from external sensors to RPM units, providing tachometer measurement of up to two rotating shafts and the status of eight alarm functions over DeviceNet. The SpeedTalker DN (UI) is ODVA conformance tested

Motor and Motion Controllers - MICROLENGTH 196

Motor and Motion Controllers - MICROLENGTH 196
Mã sản phẩm: MICROLENGTH 196
Nhà sản xuất:
The first closed loop position/length controller designed specifically to replace preset counter systems with improved accuracy and cycle time

«Back Next»
Liên Hệ Trực Tuyến

Tel: (08) - 6675.2925

(08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0933.060.076

sales@cntruongthanh.com



SẢN PHẨM CHÍNH
encoder
sensor
burkert
krohne
kuebler

Cảm Biến - Sensor

Lượt truy cập
TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-6675.2925      Fax: 08-3511.7931
Email: sales@cntruongthanh.com
Hotline: 0933.060.076
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com